File No. 35035

This rule was published in the August 1, 2011, issue (Vol. 2011, No. 15) of the Utah State Bulletin.


Commerce, Occupational and Professional Licensing

Rule R156-22

Professional Engineers and Professional Land Surveyors Licensing Act Rule

Notice of Proposed Rule

(Amendment)

DAR File No.: 35035
Filed: 07/12/2011 08:54:58 AM

RULE ANALYSIS

Purpose of the rule or reason for the change:

The Division and Professional Engineers and Professional Land Surveyors Licensing Board reviewed this rule and have determined that the current definition of "recognized jurisdiction" is overly restrictive to applicants applying for licensure by endorsement. This rule filing modifies that definition and makes other minor changes.

Summary of the rule or change:

In Subsection R156-22-102(14), the proposed amendment modifies the definition of the term "recognized jurisdiction". The current definition is overly restrictive because it prevents qualified professional engineers, professional structural engineers and professional land surveyors licensed in other jurisdictions from becoming licensed in Utah. In short, the current definition includes a narrow set of requirements that are not in place in many jurisdictions. Subsection R156-22-302b(1)(c) is updated to reference a new evaluation standard adopted by the National Council of Examiners for Engineering and Surveying (NCEES). This new standard allows for consideration of graduate level coursework in addition to work at the bachelor's level. The former standard, that of equivalency to an Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET) accredited program, only considered bachelor's level coursework. In Subsection R156-22-302d(2)(b), the proposed amendment deletes a reference to a former title of an examination and replaces it with the current title.

State statutory or constitutional authorization for this rule:

  • Section 58-22-101
  • Subsection 58-1-106(1)(a)
  • Subsection 58-1-202(1)(a)

Anticipated cost or savings to:

the state budget:

The Division will incur minimal costs of approximately $100 to print and distribute the rule once the proposed amendments are made effective. Any costs incurred will be absorbed in the Division's current budget.

local governments:

The proposed amendments only apply to licensed professional engineers, professional structural engineers and professional land surveyors and applicants for licensure by endorsement in those classifications. As a result, the proposed amendments do not apply to local governments.

small businesses:

The proposed amendments only apply to licensed professional engineers, professional structural engineers and professional land surveyors and applicants for licensure by endorsement in those classifications. Making the definition of "recognized jurisdiction" less restrictive provides a path to licensure to some out-of-state applicants that does not exist under the current definition. In these cases, some businesses may experience a financial benefit; however, the Division is unable to estimate the extent of any cost savings.

persons other than small businesses, businesses, or local governmental entities:

The proposed amendments only apply to licensed professional engineers, professional structural engineers and professional land surveyors and applicants for licensure by endorsement in those classifications. Making the definition of "recognized jurisdiction" less restrictive provides a path to licensure to some out-of-state applicants that does not exist under the current definition. As a result, the applicant will experience a financial benefit; however, the Division is unable to estimate the extent of the cost savings due to varying circumstances.

Compliance costs for affected persons:

The proposed amendments only apply to licensed professional engineers, professional structural engineers and professional land surveyors and applicants for licensure by endorsement in those classifications. Making the definition of "recognized jurisdiction" less restrictive provides a path to licensure to some out-of-state applicants that does not exist under the current definition. As a result, the applicant will experience a financial benefit; however, the Division is unable to estimate the extent of the cost savings due to varying circumstances.

Comments by the department head on the fiscal impact the rule may have on businesses:

Out-of-state license applicants and engineering and land surveying businesses may experience a positive fiscal impact based on this rule filing which amends the educational requirements so as to be in line with the national standard. That impact cannot be estimated. No impact is anticipated from the remaining technical changes made in this filing.

Francine A. Giani, Executive Director

The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

Commerce
Occupational and Professional Licensing
160 E 300 S
SALT LAKE CITY, UT 84111-2316

Direct questions regarding this rule to:

  • Rich Oborn at the above address, by phone at 801-530-6767, by FAX at 801-530-6511, or by Internet E-mail at roborn@utah.gov

Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

08/31/2011

Interested persons may attend a public hearing regarding this rule:

  • 08/15/2011 09:00 AM, Heber Wells Bldg, 160 E 300 S, Conference Room 475, Salt Lake City, UT

This rule may become effective on:

09/07/2011

Authorized by:

Mark Steinagel, Director

RULE TEXT

R156. Commerce, Occupational and Professional Licensing.

R156-22. Professional Engineers and Professional Land Surveyors Licensing Act Rule.

R156-22-102. Definitions.

In addition to the definitions in Title 58, Chapters 1, 3a and 22, as used in Title 58, Chapters 1, 3a and 22, or this rule:

(1) "Complete and final", as used in Section 58-22-603, means "complete construction plans" as defined in Subsection 58-22-102(3).

(2) "Direct supervision", as used in Subsection 58-22-102(10), means "supervision" as defined in Subsection 58-22-102(16).

(3) "Employee, subordinate, associate, or drafter of a licensee", as used in Subsections 58-22-102(16), 58-22-603(1)(b) and this rule, means one or more individuals not licensed under this chapter, who are working for, with, or providing professional engineering, professional structural engineering, or professional land surveying services directly to and under the supervision of a person licensed under this chapter.

(4) "Engineering surveys", as used in Subsection 58-22-102(9), include all survey activities required to support the sound conception, planning, design, construction, maintenance, and operation of engineered projects, but exclude the surveying of real property for the establishment of land boundaries, rights-of-way, easements, alignment of streets, and the dependent or independent surveys or resurveys of the public land survey system.

(5) "Highly toxic materials", as used in Subsection 58-22-102(14)(a)(ii)(F), is hazardous materials as defined in Section 307 of the 2009 International Building Code and Section 2703 of the 2009 International Fire Code.

(6) "Incidental practice" means "architecture work as is incidental to the practice of engineering", as used in Subsection 58-22-102(9), and "engineering work as is incidental to the practice of architecture", as used in Subsection 58-3a-102(6), which:

(a) can be safely and competently performed by the licensee without jeopardizing the life, health, property and welfare of the public;

(b) is secondary and substantially less in scope and magnitude when compared to the work performed or to be performed by the licensee in the licensed profession;

(c) is work in which the licensee is fully responsible for the incidental practice performed as provided in Subsections 58-3a-603(1) or 58-22-603(1);

(d) is work that affects not greater than 49 occupant as determined in Section 1004 of the 2009 International Building Code;

(e) is work included on a project with a construction value not greater than 15 percent of the overall construction value for the project including all changes or additions to the contracted or agreed upon work; and

(f) shall not include work on a building or related structure in an occupancy category of III or IV as defined in 1604.5 of the 2009 International Building Code.

(7) "Maximum allowable quantities", as used in Subsection 58-22-102(14)(a)(ii)(F), is quantities of hazardous materials as set forth in Section 307 of the 2009 International Building Code, Tables 307.1(1) and 307.1(2), which when exceeded, would classify the building, structure or portion thereof as Group H-1, H-2, H-3, H-4 or H-5 hazardous use.

(8) "NCEES FE", as used throughout this rule, means the National Council of Examiners in Engineering and Surveying Fundamentals of Engineering Examination.

(9) "NCEES FS", as used throughout this rule, means the National Council of Examiners in Engineering and Surveying Fundamentals of Surveying Examination.

(10) "NCEES PE", as used throughout this rule, means the National Council of Examiners in Engineering and Surveying Principles and Practice of Engineering Examination.

(11) "NCEES PS", as used throughout this rule, means the National Council of Examiners in Engineering and Surveying Principles and Practice in Surveying Examination.

(12) "NCEES SE", as used throughout this rule, means the National Council of Examiners in Engineering and Surveying Structural Engineering Examination.

(13) "Professional structural engineering or the practice of structural engineering", as defined in Subsection 58-22-102(14), is further defined to exclude the design and oversight of the construction and installation of highway, utility, or pedestrian bridges.

(14) "Recognized jurisdiction", as used in Subsection 58-22-302(4)(d)(i), for licensure by endorsement, means any state, district or territory of the United States, or any foreign country that issues licenses [for]to professional engineers, professional structural engineers, or professional land surveyors[, and whose licensure requirements, at the time the applicant submits a Utah license application, include:

(a) Professional Engineer.

(i) a bachelors or post graduate degree in engineering or equivalent education as determined by the NCEES Credentials Evaluations and four years of full time engineering experience under supervision of one or more licensed engineers; and

(ii) passing the NCEES PE examination.

(b) Professional Structural Engineer.

(i) a bachelors or post graduate degree in engineering or equivalent education as determined by the NCEES Credentials Evaluations and four years of full time engineering experience under supervision of one or more licensed engineers;

(ii) passing the NCEES SE examination; and

(iii) three years of licensed experience in professional structural engineering.

(c) Professional Land Surveyor.

(i) an associate or higher education degree in land surveying as set forth in Subsection R156-22-302b(2)(c) or equivalent education as determined by the NCEES Credentials Evaluations and four years of full time land surveying experience under supervision of one or more licensed professional land surveyors; and

(ii) passing the NCEES PS examination or passing a professional land surveying examination that is substantially equivalent to the NCEES PS examination].

(15) "Responsible charge" by a principal, as used in Subsection 58-22-102(7), means that the licensee is assigned to and is personally accountable for the production of specified professional engineering, professional structural engineering or professional land surveying projects within an organization.

(16) "TAC/ABET" means Technology Accreditation Commission/Accreditation Board for Engineering and Technology(ABET, Inc.).

(17) "Under the direction of the licensee", as used in Subsection 58-22-102(16), as part of the definition of "supervision of an employee, subordinate, associate, or drafter of a licensee", means that the unlicensed employee, subordinate, associate, or drafter of a person licensed under this chapter engages in the practice of professional engineering, professional structural engineering, or professional land surveying only on work initiated by a person licensed under this chapter, and only under the administration, charge, control, command, authority, oversight, guidance, jurisdiction, regulation, management, and authorization of a person licensed under this chapter.

(18) "Unprofessional conduct" as defined in Title 58, Chapters 1 and 22, is further defined, in accordance with Subsection 58-1-203(1)(e), in Section R156-22-502.

 

R156-22-302b. Qualifications for Licensure - Education Requirements.

(1) Education requirements - Professional Engineer and Professional Structural Engineer.

In accordance with Subsections 58-22-302(1)(d) and 58-22-302(2)(d), the engineering program criteria is established as one of the following:

(a) The bachelors or post graduate engineering program shall be accredited by EAC/ABET or the Canadian Engineering Accrediting Board (CEAB).

(b) The post graduate engineering degree, when not accredited by EAC/ABET or CEAB, shall be earned from an institution which offers a bachelors or masters degree in an engineering program accredited by EAC/ABET or CEAB in the same specific engineering discipline as the earned post graduate degree and the applicant is responsible to demonstrate that the combined engineering related coursework taken (both undergraduate and post graduate) included coursework that meets or exceeds the engineering related coursework required for the EAC/ABET accreditation for the bachelor degree program.

(c) If the degree was earned in a foreign country, the engineering curriculum shall be determined [to be equivalent to an EAC/ABET accredited program ]by the NCEES Credentials Evaluations, formerly known as the Center for Professional Engineering Education Services (CPEES) , to fulfill the required curricular content of the NCEES Engineering Education Standard. Only deficiencies in course work in the humanities, social sciences and liberal arts and no more than five semester hours in math, science or engineering, not to exceed a total of 10 semester hours noted by the credentials evaluation may be satisfied by successfully completing the deficiencies in course work at a recognized college or university approved by the Division in collaboration with the Board. Engineering course work deficiencies must be completed at an EAC/ABET approved program.

(d) A TAC/ABET accredited degree is not acceptable to meet the qualifications for licensure as a professional engineer or a professional structural engineer.

(2) Education requirements - Professional Land Surveyor.

In accordance with Subsection 58-22-302(3)(d), an equivalent land surveying program for licensure as a professional land surveyor is defined as an earned bachelors or higher education degree and completion of a minimum of 30 semester hours or 42 quarter hours of course work in land surveying which shall include the following courses:

(a) successful completion of a minimum of one course in each of the following content areas:

(i) boundary law;

(ii) writing legal descriptions;

(iii) photogrammetry;

(iv) public land survey system;

(v) studies in land records or land record systems;

(vi) surveying field techniques; and

(b) the remainder of the 30 semester hours or 42 quarter hours may be made up of successful completion of courses from the following content areas:

(i) algebra, calculus, geometry, statistics, trigonometry, not to exceed six semester hours or eight quarter hours;

(ii) control systems;

(iii) drafting, not to exceed six semester hours or eight quarter hours;

(iv) geodesy;

(v) geographic information systems;

(vi) global positioning systems;

(vii) land development; and

(viii) survey instrumentation;

(c) the degree and courses shall be completed in an education institution accredited by one of the following:

(i) Middle States Association of Colleges and Schools;

(ii) New England Association of Colleges and Schools;

(iii) North Central Association of Colleges and Schools;

(iv) Northwest Commission on College and Universities;

(v) Southern Association of Colleges and Schools; or

(vi) Western Association of Schools and Colleges.

 

R156-22-302d. Qualifications for Licensure - Examination Requirements.

(1) Examination Requirements - Professional Engineer.

(a) In accordance with Subsection 58-22-302(1)(f), the examination requirements for licensure as a professional engineer are defined, clarified or established as the following:

(i) the NCEES FE examination with a passing score as established by the NCEES except that an applicant who has completed an undergraduate degree from an EAC/ABET accredited program and has completed a Ph.D. or doctorate in engineering from an institution that offers EAC/ABET undergraduate programs in the Ph.D. field of engineering is not required to pass the FE examination;

(ii) the NCEES PE examination or the NCEES SE examination with a passing score as established by the NCEES; and

(iii) pass all questions on the open book, take home Utah Law and Rules Examination, which is included as part of the license application form.

(b) If an applicant was approved by the Division of Occupational and Professional Licensing to take the examinations required for licensure as an engineer under prior Utah statutes and rules and did take and pass all examinations required under such prior rules, the prior examinations will be acceptable to qualify for reinstatement of licensure rather than the examinations specified under Subsection R156-22-302d(1)(a).

(c) Prior to submitting an application for pre-approval to sit for the NCEES PE examination, an applicant must have successfully completed three out of the four years of the qualifying experience requirements set forth in Subsection R156-22-302c(1) after having successfully completed the education requirements set forth in Subsection R156-22-302b(1).

(d) The admission criteria to sit for the NCEES FE examination is set forth in Section 58-22-306.

(2) Examination Requirements - Professional Structural Engineer.

(a) In accordance with Subsection 58-22-302(2)(f), the examination requirements for licensure as a professional structural engineer are established as the following:

(i) the NCEES FE examination with a passing score as established by the NCEES;

(ii) the NCEES SE examination, and prior to April 2011, the NCEES Structural I and Structural II Examinations with a passing score as established by the NCEES; and

(iii) as part of the application for license, pass all questions on the open book, take home Utah Law and Rules Examination.

(b) Prior to submitting an application for pre-approval to sit for the NCEES [Structural II]SE examination, an applicant must have successfully completed two out of the three years of the experience requirements set forth in Subsection R156-22-302c(3).

(3) Examination Requirements - Professional Land Surveyor.

(a) In accordance with Subsection 58-22-302(3)(e), the examination requirements for licensure as a professional land surveyor are established as the following:

(i) the NCEES FS examination with a passing score as established by the NCEES;

(ii) the NCEES PS examination with a passing score as established by the NCEES; and

(iii) the Utah Local Practice Examination with a passing score of at least 75. An applicant who fails the Utah Local Practice Examination may retake the examination as follows:

(A) no sooner than 30 days following any failure, up to three failures; and

(B) no sooner than six months following any failure thereafter.

(b) Prior to submitting an application for pre-approval to sit for the NCEES PS examination, an applicant must have successfully completed the education requirement set forth in Subsection R156-22-302b(2) and three out of the four years of the qualifying experience requirements set forth in Subsection R156-22-302c(4).

(4) Examination Requirements for Licensure by Endorsement.

In accordance with Subsection 58-22-302(4)(d)(ii), the examination requirements for licensure by endorsement are established as follows:

(a) Professional Engineer: An applicant for licensure as a professional engineer by endorsement shall comply with the examination requirements in Subsection R156-22-302d(1) except that the Board may waive one or more of the following examinations under the following conditions:

(i) the NCEES FE examination for an applicant who is a principal for five of the last seven years preceding the date of the license application and who was not required to pass the NCEES FE examination for initial licensure from the recognized jurisdiction the applicant was originally licensed;

(ii) the NCEES PE examination for an applicant who is a principal for five of the last seven years preceding the date of the license application, who has been licensed for 20 years preceding the date of the license application, and who was not required to pass the NCEES PE examination for initial licensure from the recognized jurisdiction the applicant was originally licensed.

(b) Professional Structural Engineer: An applicant for licensure as a professional structural engineer by endorsement shall comply with the examination requirements in Subsection R156-22-302d(2) except that the Board may waive the NCEES FE examination for an applicant who is a principal for five of the last seven years preceding the date of the license application and who was not required to pass the NCEES FE examination for initial licensure from the recognized jurisdiction the applicant was originally licensed.

(c) Professional Land Surveyor: An applicant for licensure as a professional land surveyor by endorsement shall comply with the examination requirements in Subsection R156-22-302d(3) except that the Board may waive either the NCEES FS examination or the NCEES PS examination or both to an applicant who is a principal for five of the last seven years preceding the date of the license application and who was not required to pass the NCEES FS examination or the NCEES PS examination for initial licensure from the recognized jurisdiction the applicant was originally licensed.

 

KEY: professional land surveyors, professional engineers, professional structural engineers

Date of Enactment or Last Substantive Amendment: [March 24, ]2011

Notice of Continuation: November 15, 2007

Authorizing, and Implemented or Interpreted Law: 58-22-101; 58-1-106(1)(a); 58-1-202(1)(a)

 


Additional Information

The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at https://rules.utah.gov/publicat/bull-pdf/2011/b20110801.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version.

Text to be deleted is struck through and surrounded by brackets (e.g., [example]). Text to be added is underlined (e.g., example).  Older browsers may not depict some or any of these attributes on the screen or when the document is printed.

For questions regarding the content or application of this rule, please contact Rich Oborn at the above address, by phone at 801-530-6767, by FAX at 801-530-6511, or by Internet E-mail at roborn@utah.gov.