DAR File No. 37327

This rule was published in the March 1, 2013, issue (Vol. 2013, No. 5) of the Utah State Bulletin.


Environmental Quality, Solid and Hazardous Waste

Rule R315-306

Incinerator Standards

Notice of Proposed Rule

(Amendment)

DAR File No.: 37327
Filed: 02/15/2013 08:37:20 AM

RULE ANALYSIS

Purpose of the rule or reason for the change:

Changes are required to conform with S.B. 21 passed during 2012 General Session (Chapter 360, Laws of Utah 2012).

Summary of the rule or change:

S.B. 21, passed during the 2012 General Session, removed some authorities from the Utah Solid and Hazardous Waste Control Board and its Executive Secretary and gave them to the Director of the Division of Solid and Hazardous Waste. This change in statute now requires changes to the Solid and Hazardous Waste rules. Specifically, references to the "Board" and the "Executive Secretary" in the rules need to be changed to "Director" as appropriate.

State statutory or constitutional authorization for this rule:

  • Section 19-6-105
  • Section 19-6-108
  • Section 19-6-107

Anticipated cost or savings to:

the state budget:

There are no anticipated costs or savings as this amendment only changes who has authority to make regulatory decisions.

local governments:

There are no anticipated costs or savings as this amendment only changes who has authority to make regulatory decisions.

small businesses:

There are no anticipated costs or savings as this amendment only changes who has authority to make regulatory decisions.

persons other than small businesses, businesses, or local governmental entities:

There are no anticipated costs or savings as this amendment only changes who has authority to make regulatory decisions.

Compliance costs for affected persons:

There are no compliance costs for affected persons as this amendment only changes who has authority to make regulatory decisions.

Comments by the department head on the fiscal impact the rule may have on businesses:

There is no anticipated fiscal impact on businesses as this amendment only changes who has authority to make regulatory decisions.

Amanda Smith, Executive Director

The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

Environmental Quality
Solid and Hazardous WasteRoom Second Floor
195 N 1950 W
SALT LAKE CITY, UT 84116-3097

Direct questions regarding this rule to:

  • Allan Moore at the above address, by phone at 801-536-0211, by FAX at 801-536-0222, or by Internet E-mail at allanmoore@utah.gov
  • Tina Mercer at the above address, by phone at 801-536-0259, by FAX at 801-536-0222, or by Internet E-mail at tmmercer@utah.gov

Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

04/01/2013

This rule may become effective on:

04/15/2013

Authorized by:

Scott Anderson, Director

RULE TEXT

R315. Environmental Quality, Solid and Hazardous Waste.

R315-306. Incinerator Standards.

R315-306-2. Requirements for Large Incinerators.

(1) These standards apply to any incinerator facility designed to incinerate more than ten tons of solid waste per day.

(2) A new incinerator facility shall be subject to the location standards of Section R315-302-1 with the exception of the following Subsections: R315-302-1(2)(a)(iv) and (v), R315-302-1(2)(e), and R315-302-1(3).

(3) Each owner or operator of an incinerator facility shall comply with Section R315-302-2. The submitted plan of operation shall also address alternative storage, or disposal plans for all breakdowns that would result in overfilling the storage facility.

(4) The submitted plan of operation shall also contain a written waste identification plan which shall include identification of the specific waste streams to be handled by the facility, generator waste analysis requirements and procedures, waste verification procedures at the facility, generator certification of wastes shipped as being non-hazardous, and record keeping procedures, including a detailed operating record.

(5) Each incinerator facility shall be surrounded by a fence, trees, shrubbery, or natural features so as to control access and be screened from the view of immediately adjacent neighbors, unless the tipping floor is fully enclosed by a building. Each site shall also have an adequate buffer zone of at least 50 feet from the operating area to the nearest property line in areas zoned residential to minimize noise and dust nuisances.

(6) Solid waste shall be stored temporarily in storage compartments, containers or areas specifically designed to store wastes. Storage of wastes other than in specifically designed compartments, containers or areas is prohibited. Equipment and space shall be provided in the storage and charging areas, and elsewhere as needed, to allow periodic cleaning as may be required to maintain the plant in a sanitary and clean condition.

(7) A composite sample of the ash and residues from each incinerator facility shall be taken according to a sampling plan approved by the [Executive Secretary]Director.

(a) The sample shall be analyzed by the U.S. EPA Test Method 1311 as provided in 40 CFR Part 261, Appendix II, 2000 ed., Toxic Characteristics Leaching Procedure (TCLP) to determine if it is hazardous.

(b) If the ash and residues are found to be nonhazardous, they shall be disposed at a permitted landfill or recycled.

(c) If the ash and residues are found to be hazardous, they shall be disposed in a permitted hazardous waste disposal site.

(8) Each incinerator must be located, designed, constructed and operated in a manner to comply with appropriate state and local air pollution control authority emission and operating requirements.

(9) An incinerator must collect and treat all run-off from the active areas of the site that may result from a 25-year storm event, and divert all run-on for the maximum flow of a 25-year storm around the site.

(10) All-weather roads shall be provided from the public highways or roads, to and within the disposal site and shall be designed and maintained to prevent traffic congestion hazards, dust, and noise pollution.

(11) Access to the incinerator site shall be controlled by means of a complete perimeter fence or other features and gates which shall be locked when an attendant is not at the gate to prevent unauthorized entry of persons or livestock to the facility.

(12) The plan of operation shall include a training program for new employees and annual review training for all employees to ensure safe handling of waste and proper operation of the equipment.

(13) Each owner or operator shall post signs at the facility which indicate the name, hours of operation, necessary safety precautions, types of wastes that are prohibited, and any other pertinent information.

(14) Each owner or operator of an incinerator facility shall be required to provide recycling facilities in a manner equivalent to those specified for landfills in Subsection R315-303-4(6).

(15) Each owner or operator of an incinerator facility shall implement a plan to inspect loads or take other steps, as approved by the [Executive Secretary]Director, to prevent the disposal of prohibited hazardous waste or prohibited waste containing PCB's in a manner equivalent to those specified for landfills in Subsection R315-303-4(7).

(16) Each owner or operator shall close its incinerator by removing all ash, solid waste, and other residues to a permitted facility.

(17) Each owner or operator of an incinerator facility shall provide financial assurance to cover the costs for closure of the facility that meets the requirements of Rule R315-309.

 

R315-306-3. Requirements for Small Incinerators.

(1) Applicability.

(a) These requirements apply to any incinerator designed to incinerate ten tons, or less, of solid waste per day and incinerator facilities that incinerate solid waste only from on-site sources.

(b) If an incinerator processes 250 pounds, or less, of solid waste per week, the requirements of Section R315-306-3 do not apply and a permit from the [Executive Secretary]Director is not required but the facility may be regulated by other local, state, or federal requirements.

(2) Requirements.

(a) Each owner and operator of an incinerator facility shall submit a plan of operation to the [Executive Secretary]Director that meets the requirements of Section R315-302-2.

(b) The submitted plan of operation shall also address:

(i) alternative storage, or disposal plans for all breakdowns that would result in overfilling the storage areas;

(ii) identification of the specific waste streams to be handled by the facility;

(iii) generator waste analysis requirements and procedures;

(iv) waste verification procedures at the facility;

(v) generator certification of wastes shipped as being nonhazardous; and

(vi) recordkeeping procedures, including a detailed operating record.

(c) Solid waste shall be stored temporarily only in storage compartments, containers, or areas specifically designed to store wastes.

(i) Storage of wastes other than in specifically designed compartments, containers or areas is prohibited.

(ii) Equipment and space shall be provided in the storage and charging areas, and elsewhere as needed, to allow periodic cleaning as necessary to maintain the plant in a sanitary and clean condition.

(d) Incinerator ash and residues from any incinerator shall be sampled, analyzed, and disposed as specified in Subsection R315-306-2(7).

(e) The owner or operator of the incinerator shall prevent the disposal of prohibited hazardous waste or prohibited waste containing PCB's as specified in Subsection R315-306-2(15).

(f) The incinerator must be designed, constructed and operated in a manner to comply with appropriate state and local air pollution control authority emission and operating requirements.

(g) The plan of operation shall include a training program for new employees and annual review training for all applicable employees to ensure safe handling of waste and proper operation of the equipment.

(h) The owner or operator of the incinerator shall close the facility by removing all solid waste, ash, and other residues to a permitted solid waste disposal facility.

(i) The owner or operator of the incinerator facility shall provide financial assurance to cover the costs for closure of the facility that meets the requirements of Rule R315-309.

 

KEY: solid waste management, waste disposal

Date of Enactment or Last Substantive Amendment: [February 1, 2007]2013

Notice of Continuation: February 14, 2008

Authorizing, and Implemented or Interpreted Law: 19-6-104; 19-6-105; 19-6-108

 


Additional Information

The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at https://rules.utah.gov/publicat/bull-pdf/2013/b20130301.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version.

Text to be deleted is struck through and surrounded by brackets (e.g., [example]). Text to be added is underlined (e.g., example).  Older browsers may not depict some or any of these attributes on the screen or when the document is printed.

For questions regarding the content or application of this rule, please contact Allan Moore at the above address, by phone at 801-536-0211, by FAX at 801-536-0222, or by Internet E-mail at allanmoore@utah.gov; Tina Mercer at the above address, by phone at 801-536-0259, by FAX at 801-536-0222, or by Internet E-mail at tmmercer@utah.gov.