File No. 36231
This rule was published in the June 15, 2012, issue (Vol. 2012, No. 12) of the Utah State Bulletin.
Public Safety, Driver License
Rule R708-21
Third-Party Testing
Notice of Proposed Rule
(Repeal and Reenact)
DAR File No.: 36231
Filed: 05/16/2012 04:47:51 PM
RULE ANALYSIS
Purpose of the rule or reason for the change:
The purpose of this repeal and reenactment is to establish standards and procedures for third-party testers and third-party examiners who enter into an agreement with the state, to administer skills tests to commercial drivers.
Summary of the rule or change:
This repeal and reenactment puts the Utah Driver License Division into compliance with the Federal Motor Carrier Safety Administration (FMCSA) guidelines 383.75 for licensing and regulating of the CDL third party testers and examiners. Removed from the original rule is the entire subsection F "Certificate of Driver Competency" because electronically sending the scores to Driver License no longer applies. Subsection H has been rewritten to clarify sanction of the new rule. This document contains new definitions for the updated language of this rule. Other items include change to the third-party testers that only companies that have been in business for at least two years or longer or that has an examiner that has been testing CDL drivers two years or longer are qualified to be in this program. The examiners must give at least ten tests a year to stay complaint. The company must designate a person that will maintain all files with new and used score sheets, inform Driver license of any personal changes and schedule the yearly reviews. This document updates the third party examiner s requirement to have at least three years of driving experience, pass a criminal background check, and have physical strength to enter and exit a commercial vehicle. The third-party examiner must take the required training and pass the final test with 80% or better. Upon completion of training have a driver license employee watch an acceptable test to verify understanding of proper testing. Processing the completed test has changed to help minimize fraud. The test must be scheduled at least 48 hours on the Driver license web application prior to administering the test. The scores are then sent into Driver license electronically within 48 hours of testing on Driver license web application. The used score sheets must be destroyed after three years by the third-party tester. Sections have been added to not allow a tester or examiner to withhold test sheets after a test has been administered. Notification of accident has been added to help assure that testing routes are suitable and safe for testing. Grounds for revocation, probation, or denial have been updated with language to more define consequences of violation of this rule. Adjudicative proceedings have been added. Changing this rule will adopt the changes recommended by the Utah legislative audit. One benefit of this change includes greater security and fraud reduction for the program by adding electronic scheduling and reporting of the test scores.
State statutory or constitutional authorization for this rule:
- Section 53-3-104
- 49 CFR Part 383.75
Anticipated cost or savings to:
the state budget:
The state will see an increase associated with the requirement of a background check. The Department of Public Safety will be receiving $20, or the current rate, for every background check.
local governments:
Costs to local government will be the current price of a background check. The Division cannot provide an estimate of the total costs to local government because it is not known how many background checks will need to be performed.
small businesses:
Costs to small businesses will be the current price of a background check. The Division cannot provide an estimate of the total costs to small businesses because it is not known how many background checks will need to be performed.
persons other than small businesses, businesses, or local governmental entities:
Costs to individuals will be the current price of a background check. The Division cannot provide an estimate of the total costs because the fee may be paid by small business or local government.
Compliance costs for affected persons:
The compliance costs are currently $20 for each criminal background fee.
Comments by the department head on the fiscal impact the rule may have on businesses:
There will be a fiscal impact on business in order to be compliant with the required back ground check.
Lance Davenport, Commissioner
The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:
Public SafetyDriver License
CALVIN L RAMPTON COMPLEX
4501 S 2700 W 3RD FL
SALT LAKE CITY, UT 84119-5595
Direct questions regarding this rule to:
- Marge Dalton at the above address, by phone at 801-965-4456, by FAX at 801-957-8502, or by Internet E-mail at [email protected]
Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:
07/16/2012
This rule may become effective on:
07/23/2012
Authorized by:
Lance Davenport, Commissioner
RULE TEXT
R708. Public Safety, Driver License.
[R708-21. Third-Party Testing.
R708-21-1. Definitions.
"Agreement" means a written agreement between
the state and a third-party tester agreeing to conditions
contained therein.
"Department" means the Department of Public
Safety.
"Division" means the Driver License
Division.
"Third-party tester" means a person, an agency
of this or another state, an employer, a private driver training
facility or other private institution, or a department, agency,
or entity of local government with whom the state has an
agreement to administer skills tests to commercial
drivers.
R708-21-2. Authority and Purpose.
A. This rule is authorized by Sections 53-3-213 and
53-3-407, and 49 Part 383.75 of the Code of Federal
Regulations.
B. The purpose of this rule is to establish standards and
procedures for third-party testers who enter into an agreement
with the state to administer skills tests to commercial
drivers.
R708-21-3. Standards and Procedures.
A. Application for third-party tester
certification.
1. Application for an original or renewal certification
shall be made on a form furnished by the division, and shall
include the following:
a. Name of third-party tester.
b. Address of third-party tester.
c. Names of all third-party examiners.
d. Addresses of all testing sites.
e. Third-party agreement.
2. Upon receipt of the application, the division shall
schedule an inspection of the third-party tester to determine
eligibility, establish test routes, schedule instruction and
provide forms.
3. When certified, the third-party tester and all
authorized examiners shall be placed on a list which is provided
to all state commercial driver license examining stations. A
formal letter of certification will be mailed to the third-party
tester containing an assigned number to be used on official
documents and the expiration date of the certification.
4. Certification shall be for a period of one year. No
later than one month prior to expiration of certification, the
third-party tester may submit a renewal application to the
division which is the same process as applying for an original
certification.
B. Agreement - The third-party tester is required to
enter into a written agreement with the state to conduct skills
tests as required by Federal regulation established in 49 C.F.R.
part 383. The agreement must contain provisions that:
1. Allow the Federal Highway Administration or its
representative, and/or the division to conduct random
examinations, inspections, and audits without prior notice during
normal business hours.
2. Allow the division to conduct on-site inspections
annually or when deemed necessary by the division.
3. Require that all third-party examiners receive
training approved by the division that will allow them to conduct
skills tests that are in compliance with Federal minimum
standards.
4. Require, at least on an annual basis, that check rides
be made by division representatives.
5. The tests given by the third party are the same as
those which would otherwise be given by the state.
C. Requirements for third-party testers.
1. To be certified, a third-party tester shall:
a. Make application to and enter into an agreement with
the division as provided in Section B of these rules.
b. Maintain a place of business with at least one
permanent regularly occupied structure within the state.
c. Ensure place of business is safe and meets all
requirements of state law and local ordinances.
d. Have at least one qualified and approved third-party
examiner in their employ.
e. Not engage the service of an employee of the division
as an examiner, agent, or employee.
D. Inspection and audit process.
1. During inspections a person designated by the
third-party tester shall cooperate with the division or Federal
representative in performing on-site inspections. On-site
inspections shall at a minimum consist of:
a. Verifying third-party examiner requirements as
prescribed in section G of this rule.
b. Examination of commercial driver records.
(1) The third-party tester must maintain accurate driver
testing records and must be able to furnish them upon
request.
(2) These records must be kept for at least four years.
All record forms used by the third-party tester shall be approved
or furnished by the division.
c. Verifying test routes and procedures for skills
testing compliance.
d. Reviewing any other items the division deems necessary
to assure that requirements of certification are met.
2. Check rides may be made by any designated division
representative to verify compliance with state and Federal
minimum testing standards. Check rides by the division may
consist of:
a. A division employee taking the skills test as
administered by the third-party tester as if such employee was a
test applicant.
b. The division administering the skills test to a sample
of drivers who were previously examined by the third-party tester
to determine if the check ride results are consistent with the
third-party tester results.
c. The division administering the skills tests to a
third-party testing examiner to verify examiner skills and
compliance with state and Federal minimum testing
standards.
3. A division representative shall prepare a written
report of all inspections, check rides and audits. A copy shall
be submitted to the third-party tester and a copy retained by the
division.
E. Skill test administration.
1. Skills tests shall be conducted strictly in accordance
with the provisions of these requirements and with current test
instructions provided by the division. Such instructions may
include information on skill test content, route
selection/revision, test forms, examiner procedures, and
administrative procedures and/or changes.
2. Tests shall be conducted:
a. On test routes approved by the division.
b. In a vehicle that is representative of the class and
type of vehicle for which the CDL applicant seeks to be licensed
and for which the third-party examiner is qualified to
test.
c. Using division approved content, forms and scoring
procedures.
F. Certificate of Driver Competency.
1. The division shall supply an official Certificate of
Driver Competency form to authorized third-party testers for
their use when verifying driving competency and successful skills
test completion as required by state and Federal minimum
standards.
2. The division upon receipt of the Certificate of Driver
Competency form from an approved third-party tester shall waive
the skills portion of the application.
3. The certificate shall include the following
information:
a. Applicant's name.
b. Applicant's social security number.
c. Description of vehicle in which test was
taken.
d. Class of license, restriction and/or endorsement
tested for.
e. Authorized third-party examiner signature.
f. Authorized third-party tester name and assigned
number.
4. All authorized third-party examiners shall be required
to sign a signature card which shall be kept on file by the
division for signature verification.
5. Drivers shall submit the Certificate of Driver
Competency form to the division within 90 days of the date of the
skills test.
G. Third-party examiner requirements.
1. Third-party examiners who are authorized by the
division to administer skills test shall:
a. Receive training approved by the division. Third-party
examiners need to be aware that any training they receive from
private or other organizations may require a training fee. Upon
completion of training, third-party examiners shall be issued a
certificate of completion.
b. Test and certify only those commercial driver license
classes, endorsements, and restrictions that have been approved
by the division.
c. Hold a valid driver license with no suspensions,
revocations, cancellations or disqualifications within one year
prior to application.
d. Conduct skills tests on behalf of only one third-party
tester at any given time.
H. Denial, suspension, or cancellation of
certification.
1. The division shall deny any application for a
third-party tester or examiner certification, if the applicant
does not qualify for the certification under provisions of these
rules. Misstatements or misrepresentation may be grounds for
denying a certification.
2. The division shall cancel the certification of any
third-party tester or examiner upon the following
grounds.
a. Failure to comply with or satisfy any of the
provisions of these rules, the division's instructions or the
third-party tester agreement.
b. Falsification of any records or information relating
to the third-party testing program.
c. Commission of any act which compromises the integrity
of the third-party testing program.
d. Failure to notify the division within ten days of any
changes in examining personnel or testing locations.
e. A third-party examiner whose driver license is
suspended, revoked, canceled, or disqualified.
3. A cancellation of a third-party tester or examiner
certification shall be for the following lengths of
time:
a. First infraction shall result in a warning from the
division and an indefinite suspension of certification until the
division is satisfied that the third-party tester will meet the
requirements of this rule.
b. Second infraction of this rule arising from separate
incidents shall result in a one year cancellation of
certification.
c. Third infraction of this rule arising from separate
incidents shall result in a five year cancellation of
certification.
4. When a certification is canceled, the third-party may
request a hearing before a designated department representative.
The hearing shall consist of a finding of whether the alleged
infraction(s) occurred and based upon these findings, whether the
cancellation of certification should be rescinded or
affirmed.
5. Reinstatement following cancellation shall consist of
the third-party tester providing proof of compliance and making
application for new certification.
I. Advertising.
1. No advertisement shall indicate in any way that a
program can issue or guarantee the issuance of a commercial
driver's license, or imply that the program can in any way
influence the division in the issuance of commercial driver's
license or imply that preferential or advantageous treatment from
the department can be obtained.
2. No examiner, employee, or agent of a third-party
tester shall be permitted to advertise or solicit business or
cause business to be solicited in its behalf or display or
distribute any advertising material within 1500 feet of a
location rented, leased, or owned by the department.
KEY: training programs, driver education
Date of Enactment or Last Substantive Amendment: 1992
Notice of Continuation: January 20, 2012
Authorizing, and Implemented or Interpreted Law: 53-3-213;
53-3-407
]
R708-21. Third-Party Testing.
R708-21-1. Authority.
This rule is authorized by Sections 53-3-104 and 49 Part 383.75 of the Code of Federal Regulations.
R708-21-2. Purpose.
The purpose of this rule is to establish standards and procedures for Third-party Testers and Third-party Examiners who enter into an agreement with the State, to administer skills tests to commercial drivers.
R708-21-3. Definitions.
(1) Definitions used in this rule are found in Section 53-3-102.
(2) In addition:
(a) "act involving moral turpitude" means conduct which:
(i) is done knowingly contrary to justice, honesty, or good morals;
(ii) has an element of falsification or fraud; or
(iii) contains an element of harm or injury directed to another person or another property;
(b) "designated representative" mean a person identified by an organization, who is an officer, owner, partner or employee of the organization and who is authorized by the organization to comply with Third-party Testing Program requirements.
(c) "established business" means any company that has been issued a license by a state, county or city licensing agency to conduct business.
(d) "probation" means action taken by the department, which includes a period of close supervision as determined by the division.
(e) "revocation" means the permanent removal of certification of a Third-party Tester or Third-party Examiner.
(f) "state" means the State of Utah.
(g) "third-party examiner" means a person who has completed, passed and maintains the required training to administer the skills tests to commercial drivers.
(h) "third-party tester" means a person, an agency of this state, an employer, a private driver training facility or other private institution, or a department, agency or entity of local government with whom the state has an agreement to administer skills tests to commercial drivers.
R708-21-4. Requirements for Application, Certification and Renewal of Certification for a Third-party Tester.
(1) Application for an original or renewal Third-party Tester certification shall be made on a form furnished by the division, and shall include:
(a) name of Third-party Tester;
(b) address of Third-party Tester;
(c) number of years Third-party Tester has been in business;
(d) names of all Third-party Examiners;
(e) addresses of all testing sites;
(f) name of the designated representative; and
(g) copy of business license.
(2) Upon receipt of the application, the division shall schedule an appointment with the Third-party Tester to determine eligibility, establish test routes, schedule instruction and provide forms.
(3) A written agreement shall be made with the state to conduct skills test as required by Federal regulations established in 49 CFR Part 383. The agreement shall contain the following provisions:
(a) allow the Federal Motor Carrier Safety Administration (FMCSA) or its representative, and/or the division to conduct random examinations, inspections and audits without prior notice;
(b) allow the division to conduct on-site inspections annually or when deemed necessary by the division;
(c) require all Third-party Examiners receive training approved by the division which requires them to conduct skills tests in compliance with the FMCSA minimum standards;
(d) require at least one of the following on an annual basis:
(i) a division representative take the tests actually administered by the Third-party Examiner as if the division representative were a test applicant; or
(ii) the division test a sample of drivers who were examined by the Third-party Examiner to compare pass/fail results; or
(iii) the division co-score along with the Third-party Examiner during CDL skills test to compare pass/fail.
(4) The Third-Party tester shall:
(a) have an established business for a minimum of two years; or
(b) employ a Third-party Examiner that has been certified the previous two years under R708-21-5 of this rule;
(c) maintain a current business license required by the municipality or county;
(d) have at least one qualified and approved Third-party Examiner;
(e) require that Third-party Examiners:
(i) administer at least ten CDL skills tests in the year preceding the renewal of the Third-party Tester application; or
(ii) be observed by the division representative administering at least one CDL skills test in the proper manner;
(f) name a designated representative(s) that will sign signature cards for new employees and withdraw the authority of employees that are no longer certified to test for the company;
(g) not be permitted to engage the service of an employee of the division as an examiner, agent, or employee.
(5) Certification shall be valid for a period of twelve months. No later than one month prior to expiration of certification, the Third-party Tester shall submit a renewal application to the division.
R708-21-5. Requirements for Application, Certification and Renewal of Certification for a Third-party Examiner.
(1) An application for an original or renewal Third-party Examiner certification shall be made on a form furnished by the division, and shall include the following:
(a) name of Third-party Tester;
(b) address of Third-party Tester;
(c) name of Third-party Examiner;
(d) residential address of Third-party Examiner;
(e) telephone number and email address of Third-party Examiner:
(f) signature and date of Third-party Examiner.
(2) All Third-party Examiners shall be sponsored by a Third-party Tester, who shall be responsible for all tests administered by the Third-party Examiner.
(3) An applicant for Third-party Examiner shall comply with the following requirements:
(a) have and maintain a valid driver's license with no suspensions, revocations, cancellations or disqualifications within one year prior to application;
(b) have at least three years driving experience;
(c) submit to the division a fingerprint card and a check or money order made payable to the Utah Bureau of Criminal Identification, to cover the cost associated with a criminal history background check;
(d) have the physical strength and agility to physically enter and exit commercial vehicles unassisted;
(e) complete the approved training by the division and pass the final examination with a minimum score of 80%. Third-party Examiners need to be aware that any training they receive from private or other organizations may require a training fee;
(f) schedule a time, within one year of training with the division representative, to demonstrate his/her ability to perform the skills tests according to 49 C.F.R. 383 subpart (g) and (h), in an actual test setting. Upon approval from the division representative, the examiner may begin testing. Failure to comply with this portion of this certification process will result in the examiner having to complete the approved training as described in R708-21-5 (3)(e); and
(g) upon completion of training, Third-party Examiners shall be issued a certificate of completion. The division will file and maintain a copy of the certificate of completion in the Third-party Tester file.
(4) All authorized Third-party Examiners shall be required to sign an agreement verifying that they have read and understand the required rules and training materials.
(5) Upon application for recertification a Third-party Examiner shall meet the requirements outlined in subsections 1 through 4 in addition to the following:
(a) administer at least ten CDL skills tests to different applicants in the year preceding the renewal of the Third-party Tester application; or
(b) be observed by the division representative administering at least one CDL skills tests in accordance with 49 C.F.R. 383 subpart (g) and (h)
R708-21-6. Requirements for Designated Representative.
(1) A designated representative is responsible for overseeing the Third-party Tester and Examiners. The designated representative shall be the liaison between division representatives and Third-party Examiners.
(2) A designated representative shall:
(a) maintain personnel files for all Third-party Examiners assigned to their company;
(b) notify the division in writing within 10 calendar days of any change to a Third-party Examiner driving status;
(c) maintain and update all Third-party Examiners signature cards;
(d) notify the division in writing within 30 calendar days of a change to a Third-party Tester or Examiners address;
(e) make application for renewal of a Third-party Tester certificate at least one month prior to expiration date;
(f) maintain security of all CDL score sheets and personal data noted on the CDL score sheets;
(g) ensure all CDL test score sheets have been destroyed after 3 years.
R708-21-7. Skills Test Administration.
(1) Skills tests shall be conducted strictly in accordance with the provisions of these requirements and with current test instructions provided by the division and part 49 C.F.R. 383 and AAMVA training manual.
(a) Such instructions include information regarding:
(i) skills test content;
(ii) route selection/revision;
(iii) test forms;
(iv) examiner procedures; and
(v) administrative procedures.
(2) Tests shall be conducted:
(a) on test routes approved by the division;
(b) in a vehicle that is representative of the class and type of vehicle for which the CDL applicant seeks to be licensed and for which the Third-party Examiner is qualified to test; and
(c) by using division approved content, forms and scoring procedures.
(3) Third-party Examiners shall test and certify only those CDL applicants who hold a valid Commercial Driver Instruction Permit and shall ensure adherence to the class, endorsements, restrictions and expiration dates listed on the permit.
(4) All Third-party Testers and Third-party Examiners shall schedule the skills tests on the division's web application at least 48 hours prior to administering the CDL Skills test.
R708-21-8. Processing CDL Skills Test.
(1) The division shall provide training and allow access to the divisions web service application used for scheduling skills tests and recording the results of the tests to:
(a) certified Third-party Examiner; or
(b) a representative of the Third-party Tester that has met the requirements of R708-21-5(3)(c) upon approval by the division.
(2) The division shall supply an approved CDL skills test score sheet to authorized Third-party Testers for use when administering skills tests. The score sheet shall be filled out correctly and signed by both the Third-party Examiner and driver:
(a) Third-party Testers shall maintain all skill test score sheets for a period of three years after which they must be immediately destroyed by means of incineration or shred.
(b) Third-party Testers are responsible to ensure the security of all CDL score sheets and personal data collected on the CDL score sheets and the applicant.
(3) The score sheet shall include the following information:
(a) applicant's name and phone number;
(b) applicant's Utah Driver License number;
(c) description of the vehicle in which test was taken, including optional equipment;
(d) Gross Vehicle Weight Rating (GVWR);
(e) vehicle and trailer license plate numbers;
(f) class of license, restriction and/or endorsement tested for;
(g) start time, end time, and date test was administered;
(h) authorized Third-party Examiner name and assigned number;
(i) applicant's signature and date; and
(j) authorized Third-party Examiner's signature and date.
(4) The Third-party Examiner shall document all skills test results on the score sheet.
(5) The Third-party Examiner shall provide the completed skills test score sheet to the driver in a sealed envelope.
(6) The Third-party Examiner or Third-party Tester shall not withhold a passed skills test score sheet to an applicant that has successfully met the testing requirements.
(7) The Third-party Examiner shall enter the skills test results on the driver's record through the division web application within 48 hours of the test.
(8) Test results are only acceptable if testing was completed within the previous 6 months.
(9) The division shall accept the score sheet as proof the driver has completed one or more skills tests.
(10) As a result of the driver not completing or passing the skills test within 6 months of the original failed or incomplete test, the Third-party Examiner shall send the score sheet directly to the division representative.
R708-21-9. Inspection and Audit Process.
(1) During inspections the representative(s) designated by the Third-party Tester shall cooperate with the Division or Federal representative with respect to on-site inspections.
(2) On-site inspections shall be conducted to verify compliance with FMCSA guidelines and this rule.
(3) The Third-party Tester shall maintain accurate driver testing records and must be able to furnish them upon request.
(4) Check rides may be made by any designated division representative to verify compliance with the State and Federal minimum testing standards and may consist of:
(a) the division employee taking the skills test as administered by the Third-party Tester as if such employee was a test applicant;
(b) the division administering the skills tests to a sample of drivers who were previously examined by the Third-party Testers to determine if the check ride results are consistent with the Third-party Tester results; and
(c) the division co-score along with the Third-party Examiner during CDL skills test to compare pass/fail.
(5) A division representative shall prepare a written report of all inspections, check rides and audits. A copy of these reports shall be maintained by the division for ten years.
(6) The division shall send a renewal letter to the Third-party Tester indicating any problems, concerns or violations found during the audit with an action plan detailing how to correct the items identified.
R708-21-10. Notification of Accident.
If any Third-party Examiner is involved in an accident during the course of administering a skills test, the Examiner shall notify the division in writing within five days of the accident. The Third-party Examiner shall submit to the division a copy of the investigating law enforcement officer's accident report as soon as it is available.
R708-21-11. Advertising.
(1) No advertisement shall indicate in any way that a program can issue or guarantee the issuance of a CDL, or imply that the program can in any way influence the division in the issuance of a CDL or imply that preferential or advantageous treatment from the division can be obtained.
(2) No Third-party Tester or Third-party Examiner shall solicit business directly or indirectly or display or distribute any advertising material within 1500 feet of a building in which driver licenses are issued to the public.
(3) No Third-party Tester or Third-party Examiner shall use any Department or Division logos, letterhead, or license recreations as part of their advertising.
R708-21-12. Grounds for Revocation, Probation or Denial to Issue or Renew Third-party Tester or Third-party Examiner Certification.
(1) A Third-party Tester or Third-party Examiner may be revoked, denied or placed on probation for any of the following reasons:
(a) Failure to comply with any of the provisions of 49 Part 383 of the Code of Federal Regulations;
(b) Failure to comply with any of the provisions of Title 53-3-407 UCA;
(c) Failure to comply with any of the provisions of this rule;
(d) Falsification of any records or other required information relating to the Third-party Tester program;
(e) Commission of any act that compromises the integrity of the Third-party Tester Program Commercial Motor Vehicle Safety Act, 1986;
(f) failure to permit and cooperate with the Division or Federal representative to inspect the testing routes, testing sites or score sheets issued to the Third-party Tester; and
(g) Conviction of any crime involving dishonesty, deception or theft or an act involving moral turpitude by a Third-party Tester or Third-party Examiner;
(2) In determining whether revocation, denial or probation of a certification is appropriate, the division shall consider the third-party tester or third-party examiners involvement and severity of the violation(s).
(3) If a Third-party Examiner certificate is revoked under the emergency provisions of UAPA, section 63G-4-502, and the Third-party Tester certificate is valid, the Third-party Tester may continue conducting CDL driving skills tests provided:
(a) The Third-party Examiner is no longer employed by the Third-party Tester;
(b) A Third-party Examiner with a valid certificate is employed by the Third-party Tester;
(c) Testing shall not compromise public safety; and
(d) The Third-party Tester is found to not knowingly have allowed a Third-party Examiner to conduct tests that violate Utah and or Federal laws or this rule.
(4) Following cancellation of the Third-party Tester certification the Third-party Tester shall promptly return all CDL skills test documents. Documentation includes at a minimum:
(a) CDL Examiner manual;
(b) score sheets (both used and blank); and
(c) Third-party Examiner certificates.
R708-21-13. Adjudicative Proceedings.
(1) All adjudicative proceedings set forth in this section shall be conducted informally as provided in Section 63G-4-202.
(2) The division shall initiate agency action against a Third-party Tester or Third-party Examiner with a notice of agency action in accordance with Section 63G-4-201.
(3)(a) A Third-party Tester or Third-party Examiner who receives a notice of agency action indicating that the division intends to deny, suspend or revoke a permit or a certificate may request a hearing by filing a written request for hearing with the division within 10 calendar days from the date of the notice of agency action.
(b) If a timely request for hearing is filed, the agency action shall be stayed until the division's hearing officer issues a written decision.
(c) A hearing shall be held before the division's hearing officer within 30 calendar days of the day that the division receives the written request for hearing, unless agreed to by the parties."
(d) At the hearing, Third-party Tester or Third-party Examiner shall have an opportunity to demonstrate why the division should not take agency action.
(e) The hearing officer shall issue a written decision within 10 business days of the hearing in accordance with Section 63G-4-203.
(4) The written decision of the hearing officer shall constitute final agency action and is subject to judicial review in accordance with Section 63G-4-402.
KEY: motor vehicle safety, inspections
Date of Enactment or Last Substantive Amendment: 2012
Notice of Continuation: January 20, 2012
Authorizing, and Implemented or Interpreted Law: 53-3-104; 49 CFR 383.75
Additional Information
The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at https://rules.utah.gov/publicat/bull-pdf/2012/b20120615.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version.
Text to be deleted is struck through and surrounded by brackets (e.g., [example]). Text to be added is underlined (e.g., example). Older browsers may not depict some or any of these attributes on the screen or when the document is printed.
For questions regarding the content or application of this rule, please contact Marge Dalton at the above address, by phone at 801-965-4456, by FAX at 801-957-8502, or by Internet E-mail at [email protected].